Remove Paper From Standard Output Bin; Remove Paper From All Bins; Restore Held Jobs - Lexmark x950 series User Manual

Troubleshooting
Manual feeder expects [paper size]. Check [paper source] guides
Try one or more of the following:
•
Load the specified paper size in the manual feeder.
•
Physically adjust [paper source] guides to a recognized paper size.
•
Touch Continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the
printer cannot find a tray with the correct paper type and size, then it prints from the default source.
Memory full, cannot print faxes
There is not enough memory to print the fax job.
Touch Continue to clear the message without printing. Held faxes will attempt to print after the printer has
been restarted.
Power off, wait 2 seconds, power on
Turn the printer off and wait for 2 seconds before turning the printer back on.

Remove paper from standard output bin

Remove the stack of paper from the standard exit bin.
Remove paper from bin [x]
Remove the paper from the specified bin. The printer automatically senses paper removal and resumes
printing.
If removing the paper does not clear the message, then touch Continue.
Remove paper from [linked set bin name]
Remove paper from the specified bin. The printer automatically detects paper removal and resumes printing.
If removing the paper does not clear the message, then touch Continue.

Remove paper from all bins

Remove the paper from all of the bins. The printer automatically senses paper removal and resumes printing.
If removing the paper does not clear the message, then touch Continue.

Restore held jobs?

Try one or more of the following:
•
Touch Restore to restore all held jobs stored on the printer hard disk.
•
Touch Do not restore if you do not want any print jobs to be restored.
290