Remove Paper From Standard Output Bin; Restore Held Jobs; Some Held Jobs Were Not Restored; Supply Needed To Complete Job - Lexmark C925 User Manual

Load Manual Feeder with [paper size]
Try one or more of the following:
• Load the specified paper in the manual feeder.
• Touch Prompt each page, paper loaded or Do not prompt, paper loaded to clear the message and continue printing.
• Touch Automatically select paper to use the paper loaded in the tray.
•
Cancel the print job.
Load Manual Feeder with [paper type] [paper size]
Try one or more of the following:
•
Load the specified paper in the manual feeder.
• Touch Prompt each page, paper loaded or Do not prompt, paper loaded to clear the message and continue printing.
• Touch Automatically select paper to use the paper loaded in the tray.
•
Cancel the print job.
Paper changes needed
Try one or more of the following:
•
Touch Use current supplies to clear the message and continue printing.
• Cancel the current print job.

Remove paper from standard output bin

Remove the stack of paper from the standard exit bin.

Restore held jobs?

Try one or more of the following:
• Touch Restore to restore all held jobs stored on the printer hard disk.
• Touch Do not restore if you do not want any print jobs to be restored.

Some held jobs were not restored

Touch Continue to delete the specified job.
Note: Held jobs that are not restored stay on the hard disk and are inaccessible.

Supply needed to complete job

A supply needed to complete the job is missing. Touch Cancel to clear the message.
Tray [x] paper size unsupported
The paper size in the specified tray is unsupported. Replace it with a supported paper size.
Troubleshooting
179