Settings For Report Printing; Report Settings - Minolta Di250f Operator's Manual

17. Settings for Report Printing

Report Settings

Instructions for settings to print reports carried out by the administrator are described in this section.
• Transmission Report:
Sets the printing style of the report to confirm the facsimile transmission results. 'If TX Fail' is set at
the factory, a report is prined when transmission is unsuccessful.
• Document Image on Report:
Sets whether a copy of the transmitted document is attached to the status report or not. The factory
setting is 'ON' to attach a document image to the report.
• Activity Report:
Sets whether the activity report is automatically printed every 50 communications or not. The
factory setting is 'Output on' to print the report.
• Memory Clear Report:
Sets whether or not to print a report to notify that some documents have been cleared due to a power
failure, etc. The factory setting is 'Output ON' to print the report.
Setting
Report Set
1 Touch
Management screen.
"Accessing the Administrator Management
Screen" p. 9-2
Setting functions for printing a report.
2
<Setting for the Transmission Report>
TX Report
• Touch
on the Administrator
1171P252EA
.
1171P253EA
• Select the style for printing the status
report, and touch
Useful Tips
• Output ON:
Touch this to automatically print a
transmission report for each transmission.
• If TX Fail:
Touch this to automatically print a
transmission report only if a document could
not be sent.
• Output OFF:
Touch this to deactivate printing of the status
report automatically.
9-29
Enter
.
1171P254EA