Using the Function Utilities
5.7 Relay Initiate
Overview of the Relay Initiate function
Relay TX allows the operator to make one long distance call to a remote unit and the
remote unit will relay the message to one or more fax units in the local area. With this
function, you can save valuable time and telephone charges. This function can also
instruct the remote fax machine to send an TX Result report to one of its Speed Dial
locations.
NOTE
The following conditions must be met for Relay Initiate function:
•The fax on the receiving party is either Di151, MINOLTAFAX 2600,3600.
•The receiving party must register the One Touch key or Group dial key for relay
function.
•The receiving party must register one Speed Dial for send report.
How to use the Relay Initiate function
1. Put the original document into the document
feeding tray.
2. Press the Function key.
3. Press '7' to select the "RELAY INITIATE TX".
The following message appears briefly to
confirm your selection.
4. Select a One-Touch key that registered as
the remote fax unit(Relay station).
Function
FUNCTION
SEL. 1-8 / or FUNCTION
7 RELAY INITIATE
-SEL. RELAY STATION-
5-25
PQRS
7