Setting Relay Groups - Minolta Di250f User Manual

Data Entry

Setting relay groups

This function is used to set up your D250f/350f as a hub for relay
transmissions. Up to 5 relay groups with up to 200 locations per group can
be set. The receiver must be stored as a one-touch dial or speed dial
number in their machine.
1 Press [UTILITY].
2 Press the [REG.] tab and [RELAY
GROUP.].
3 Press the required group key.
4 Press [ABBR.], enter the one-
touch or speed-dial number of the
required recipient and press
[ENTER]. To enter more one-
touch dial and speed dial
numbers proceed as of point 3
again.
5 When you have finished entering all your entries into groups, press
[ENTER] until the standard display appears.
Note
The most recent recipient can be displayed again by pressing
[DETAIL]. Press [DEL.] to delete the displayed recipient.
Rev. / Di250f/Di350f
3
3-25