3-16
8. Selecting the Area of the Document to be Scanned and Transmitted
Scan Area
The area of the document to be scanned can be specified. Part of a large document can be sent, or
irregular-size documents (sizes other than letter or ledger) can be sent at regular size.
Selecting the Scan Area
Load the document in the unit.
1
"Handling Documents"
Press the Fax key.
2
Utility
Mode Check
Start
Touch
Quality&Reduction
3
Reduction/Area
Touch
4
p.1-20
Pause
Fax
Copy
Access
Interrupt
Stop
Panel Reset
1166O346AB
.
1171P004EA
.
1171P047EA
Touch
Scan Area
5
Select the area to be scanned and
6
Enter
touch
.
Useful Tip
Touch a key to adjust the size and direction of the
area of the document to be scanned.
Auto Detect.
When
area that most closely matches the document size
is automatically set.
Select the destination.
7
"Sending a Document"
"Using One-Touch Dialing for
Transmission"
p. 3-7
"Using Abbreviated Dialing for
Transmission"
p. 3-8
Press the Start key.
8
Transmission starts.
.
1171P051EA
1171P052EA
is touched, the scanned
p. 3-2