Protocol Settings; Proxy Server Settings; Registering Devices To Google Cloud Print - Fuji Xerox DocuPrint 5105 d User Manual

Protocol Settings

1. Press the <Settings> button on the control panel to display the menu screen.
2. Select [Admin Menu] > [Network/Port] > [TCP/IP Settings] and make settings to use the
machine in the TCP/IP (IPv4) environment, such as IP address, subnet mask, and gateway
address.
Refer to
• For information on how to set the network environment, refer to "Setting the Network Environment"(P.37).
Note
• Google Cloud Print will not function in an IPv6 environment.
3. If a manual DNS server setting is required, make settings for DNS server in [Admin Menu] >
[Network/Port] > [DNS Server].
Refer to
• For information on how to set the DNS server, refer to "[DNS Server]"(P.159).

Proxy Server Settings

Note
• Set the following items depending on the requirements of your environment.
1. Start a web browser from a network connected computer.
2. Enter the machine's IP address into the address box on the browser, and then press the
<Enter> key. Connection to CentreWare Internet Services is established.
Note
• During connection/operation, a pop-up screen for user ID/passcode entry may appear. In this case, enter a
system administrator's user ID/passcode and click [OK].
3. Click the [Properties] tab > [Connectivity] > [Protocols] > [Proxy Server] and make settings
to connect to the internet, such as server name, port number, login name, and password.
Refer to
• For information on how to set the proxy server, refer to the online help for CentreWare Internet Services.

Registering Devices to Google Cloud Print

This section explains how to register your machine to Google Cloud Print, using CentreWare
Internet Services to enable [Google Cloud Print] port.
You should create a Google account (e-mail address) in advance to register your machine to
Google Cloud Print.
Refer to
• For more information on creating an account, refer to the Google Inc. web site.
Preparing Paper
The machine will print out a registration paper during the procedure. Make the following settings
before starting the registration.
Note
• When the registration is finished, restore the original settings.
1. Press the <Settings> button on the control panel to display the menu screen.
2. Select [Use Closest Size] in [Admin Menu] > [Printer Settings] > [Substitute Tray].
3.13 Printing Using Google Cloud Print
111