Fuji Xerox DocuPrint 5105 d User Manual page 151

Setting
Port Status Sets whether to enable or disable the LPD port at printer start-up.
• [Enabled] (default)
• [Disabled]
Note
• The IP address must be set to enable the LPD port.
Important
• If the printer runs out of memory when the port is enabled, the port is sometimes
Print Mode Sets the method of processing data (language emulation).
• [Auto] (default)
• [PS] [ESCP] [HP-GL/2] [PCL] [TIFF] [KS] [KSSM] [KS5895]
• [HexDump]
PJL Sets whether to enable or disable PJL commands that are sent from the computer.
PJL commands control print jobs, and are required to print jobs using the print
driver. Use of PJL commands allows you to specify the language emulation for the
next job while another language emulation is being processed by the printer. (See
*5 on P. 215.)
• [Enabled] (default)
• [Disabled]
Connect Time-Out Sets the time after which data reception is canceled if data is not received. Specify
the value from 2 to 3600 seconds in 1-second increments. (See *2 on P. 215.)
• [16 Seconds] (default)
TBCP Filter Sets whether to enable or disable the TBCP filter during processing of PostScript
data.
• [Disabled] (default)
• [Enabled]
Port Number Sets the port number from 1 to 65535. (See *2 on P. 215.)
• [515] (default)
Note
• Set only unique port numbers.
Maximum Sessions Set the maximum number of clients that can connect to the printer simultaneously
by LPD. Specify the value from 1 to 10.
• [5] (default)
Print Queue Sets the print data queue.
• [Data Process Order] (default)
• [Job Submit Order]
automatically disabled. If this happens, either disable unused ports, or change
the memory allocation under [Allocate Memory].
After receiving data from a computer, the printer automatically detects its
language emulation and processes the data accordingly.
(See *1 on P. 215.)
After receiving data from a computer, the printer processes the data with the
selected print language.
Allows you to view data received from a computer by printing it in ASCII code
(hexadecimal format). (See *3 on P. 215.)
The printer prints print data in the order that it is processed.
The printer prints print data in the order that it is received.
Description
5.2 Common Menus Setting
151