Table of Contents
Advertisement
A.7
Installing the TC/SC Additional Fonts Kit
This section describes how to install the TC/SC Additional Fonts Kit on the printer.
Installation Procedure
1.
Press the printer's power switch to turn off the
power.
Note
• Make sure that there is no indication on the display, and
<Power Saver> button is off.
2.
Open the front cover.
3.
Press the <
power switch to turn off the main power and
close the front cover.
Note
• The <Main Power> lamp goes out on the control panel.
4.
Unplug the power cord from the power outlet
and the printer.
TC/SC Additional Fonts Kit
> side of the printer's main
A.7 Installing the TC/SC Additional Fonts Kit
383
- Quick Links:
- Loading Paper in the Bypass Tray
Hide quick links:
Advertisement
Table of Contents
