Fuji Xerox DocuPrint 5105 d User Manual page 215

[Language]
Settings
Language
Setting
Language Sets the display language for the control panel.
• [English] (default)
• [Trad. Chinese]
• [Simp. Chinese]
• [Korean]
• [Japanese]
*1
When [Auto] is selected, data will be deleted if the language emulation automatically
selected is not present or is unavailable on the printer.
*2
Holding down the < > or < > button cycles through the options. To display a setting's
default value, press < > and < > at the same time.
*3
The following information is printed in each line during dump printing:
Count
Hexadecimal code
ASCII code
*4
Character List
No.
1 Blank
2 Alphabet
3 Numerals
4 Symbols
•
*5
When [Enabled] is set, and the print mode is set to [HexDump], PJL commands are also
output by [HexDump].
•
When language emulation not installed on the printer is specified by a PJL command,
data is deleted.
*6
WSD stands for Web Services on Devices.
The display language is English.
Displays screen messages in traditional Chinese.
Displays screen messages in simplified Chinese.
Displays screen messages in Korean.
Displays screen messages in Japanese.
Prints the total number of bytes counted from the beginning of the
job data.
Prints print data delimited in 4 bytes in hexadecimal format.
Prints print data using JIS X0201 8-bit coded characters. Characters
that are not defined in JIS X0201 are printed as
Type
Space
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnop
qrstuvwxyz
0123456789
!"#$%&'()*+,-./:;q=r?@m\n^_`
Description
"
Characters
5.2 Common Menus Setting
"
UD .
215