Fuji Xerox DocuPrint 5105 d User Manual page 150

Adobe Protocol
Auto Eject Time
Bi-directional
[LPD]
150
5 Control Panel Settings
Setting
Sets the PostScript communication protocol.
• [Normal] (default)
Select this when the communication protocol is in ASCII format.
• [Binary]
Select this when the communication protocol is in binary format. Some data is
printed slower than with the [Normal] protocol.
• [TBCP]
Select this when the communication protocol is both in the ASCII and binary
formats, and switches between the two using control codes.
Note
• Select an appropriate option according to the data format specified on your print
driver.
• [Adobe Protocol] is enabled only when printing in PostScript.
Sets the time that data still remaining on your printer is automatically printed and
ejected when data has continuously not been received.
Set the time from 5 to 1275 seconds in 5-second increments. Jobs are judged as
finished when the next data is not received within the time set here, after the last
data has been received. (See *2 on P. 215.)
• [30 Seconds] (default)
Sets whether or not to enable bi-directional parallel communication (IEEE1284).
• [Enabled] (default)
• [Disabled]
Network/Port
LPD
Description
LPD
Port Status
LPD
Print Mode
LPD
PJL
LPD
Connect Time-Out
LPD
TBCP Filter
LPD
Port Number
LPD
Maximum Sessions
LPD
Print Queue