Fuji Xerox DocuPrint 5105 d User Manual page 158

[ThinPrint]
Note
• This item appears only when HDD Extension Kit (optional) is installed.
• To use ThinPrint
Port Status
Port Number
SSL/TLS
[SNMP]
Note
• SNMP must be configured when using an application to remotely manage multiple printers. SNMP manages
printer information and provides it to the management application.
Port Status
158
5 Control Panel Settings
®
feature, contact our Customers Support Center or your dealer for details.
Network/Port
ThinPrint
Setting
Sets whether to enable or disable the ThinPort port at printer start-up.
• [Enabled]
• [Disabled] (default)
Sets the port number from 1 to 65535. (See *2 on P. 215.)
• [4000] (default)
Note
• Set only unique port numbers.
Sets whether to enable or disable SSL encrypted communications.
• [Disabled] (default)
• [Enabled]
Note
• Client certificate is necessary for SSL communications.
Configure an appropriate certificate on the printer.
Network/Port
SNMP
Setting
Sets whether to enable or disable the SNMP port at printer start-up.
• [Enabled] (default)
• [Disabled]
Important
• If the printer runs out of memory when the port is enabled, the port is sometimes
automatically disabled. If this happens, either disable unused ports, or change
the memory allocation under [Allocate Memory].
ThinPrint
Port Status
ThinPrint
Port Number
ThinPrint
SSL/TLS
Description
SNMP
Port Status
SNMP
TransportProtocol
Description