Fuji Xerox DocuPrint 5105 d User Manual page 269

Error Code
016-749 Probable causes are as follows:
For a print job:
The printer language received from the print driver is unsupported by this machine.
Use the machine's print driver for printing. If the error still is not resolved, contact our Customer Support
Center.
Note
• An optional component must be installed for some printer languages such as PostScript. For more
information, contact our Customer Support Center.
016-750 The machine received a printing job ticket with a PDF, an XPS from an application (such as
ContentsBridge) that allows direct transmissions of files, but the printing job ticket data had a grammar
or print instruction unsupported by the machine.
Check whether you are correctly using the application (such as ContentsBridge) and whether the print
instruction was correct.
If your application usage and print instruction are correct, check with the application manufacturer that
sent the print job for operations of the application.
If the error still is not resolved, have the Configuration Report, the Job History Report, and the print data
with the printing job ticket ready, and contact our Customer Support Center.
Note
• XPS stands for XML Paper Specification.
016-751 Probable causes are as follows:
1 During the PDF Bridge processing, a syntax or parameter error occurred, an undefined command was
used, and a PDF file was damaged.
2 When [Process Mode [408])] for the PDF Direct Print feature has been set to [PS([1])], memory is
insufficient.
3 When [Process Mode [408])] for the PDF Direct Print feature has been set to [PS([1])], a PDF file
including OpenType fonts is processed.
For 1), use the print driver to print the document.
For 2), take one of the following measures:
• Use the print driver to print the document.
• Increase PostScript memory.
For 3), create a PDF file in which OpenType fonts are not included.
For more information on the memory, refer to "[Allocate Memory]" (P.204).
016-752 Unable to process for PDF Bridge because of insufficient memory space.
Change the [Image Quality] setting from [High Resolution] to [High Quality], or from [High Quality] to
[Standard].
016-753 The password entered does not match that of the PDF file.
Set the correct password on ContentsBridge.
016-755 Attempted to process a print-protected PDF file.
Cancel the print protection using Adobe
016-756 Do not have permission to use the service.
Consult your system administrator.
016-757 The passcode is incorrect.
Enter the correct passcode.
016-758 The division does not have permission to use the service.
Consult your system administrator.
016-759 The number of pages reached the maximum number of pages for this service.
Consult your system administrator.
016-760 An error occurred during PostScript processing.
Take one of the following measures:
• Set [Image Quality] to [High Speed].
• Increase PostScript memory.
For more information on [Image Quality], refer to the help of the print driver. For more information on
memory, refer to "[Allocate Memory]" (P.204).
Cause/Remedy
® ®
Acrobat Reader , and try printing again.
6.7 Error Messages and Error Codes
269