Fuji Xerox DocuPrint 5105 d User Manual page 157

[WSD]
Network/Port
WSD
Note
• WSD stands for Web Services on Devices.
Setting
Port Status Sets whether to enable or disable the WSD port at printer start-up.
• [Enabled] (default)
• [Disabled]
Important
• If the printer runs out of memory when the port is enabled, the port is sometimes
Port Number
Sets the port number from 1 to 65535. (See *2 on P. 215.)
• [80] (default)
Note
• Set only unique port numbers. Note, however, that InternetServices/IPP/SOAP/
[SOAP]
Network/Port
SOAP
Setting
Port Status Sets whether to enable or disable the SOAP port at printer start-up.
• [Enabled] (default)
• [Disabled]
Important
• If the printer runs out of memory when the port is enabled, the port is sometimes
Port Number Sets the port number from 1 to 65535. (See *2 on P. 215.)
• [80] (default)
Note
• Set only unique port numbers. Note, however, that InternetServices/IPP/SOAP/
WSD
Port Status
WSD
Port Number
automatically disabled. If this happens, either disable unused ports, or change
the memory allocation under [Allocate Memory].
UPnP/WSD ports and Internet services that use HTTP protocol can share the
same port number.
SOAP
Port Status
SOAP
Port Number
automatically disabled. If this happens, either disable unused ports, or change
the memory allocation under [Allocate Memory].
UPnP/WSD (See *6 on P. 215) ports and Internet services that use HTTP protocol
can share the same port number.
Description
Description
5.2 Common Menus Setting
157