Changing An Ip Address - Fuji Xerox DocuPrint 5105 d User Manual

7.4

Changing an IP Address

This section explains how to change the fixed IPv4 address on the printer manually.
Note
• Use CentreWare Internet Services to change the fixed IPv6 address on the printer. Use this address to access
CentreWare Internet Services. Set the IPv6 address by selecting [Properties] tab >[Connectivity] > [Protocols] >
[TCP/IP].
Changing an IP Address
Important
• Addresses including IP address, subnet mask and gateway address depend on your network environment. Consult
your network administrator for setting addresses.
1. On the control panel, press the <Settings>
button to display the menu screen.
2. Press the < > button until [Admin Menu] is
displayed.
Note
• If you went past the desired item, return to the item by
pressing the<
3. Press the < > or <OK> button to select.
[Network/Port] is displayed.
Note
• If you pressed the
return to the previous screen by pressing the
<Back> button.
• To start over from the beginning, press the <Settings>
button.
4. Press the < > or <OK> button to select.
[TCP/IP Settings] is displayed.
5. Press the < > or <OK> button to select.
[IP Mode] is displayed.
6. Press the < > button until [IPv4 Settings] is
displayed.
7. Press the < > or <OK> button to select.
[Get IP Address] is displayed.
> button.
< >
or <OK> button on the wrong item,
Settings
Print Reports
Settings
Admin Menu
Admin Menu
Network/Port
< >
or the
Network/Port
TCP/IP Settings
TCP/IP Settings
IP Mode
TCP/IP Settings
IPv4 Settings
IPv4 Settings
Get IP Address
7.4 Changing an IP Address
317