Changing The Settings; Basic Procedure - Fuji Xerox DocuPrint 5105 d User Manual

Changing the Settings

Basic Procedure

To display a menu screen or to move up and down the menus to make the printer settings, use
the following buttons on the control panel.
Press to display the menu screen
(print screen)
Ready to print
<Settings>
Note
• Once you save a value by pressing the <OK> button, a "•" mark appears before the value. To change the value,
return to the initial screen and repeat the preceding steps.
• To enable the settings of some items, the printer sometimes must be restarted. In this case, the printer
automatically restarts when the menu screen is exited.
Resetting a Value to Its Default
For items to change numeric values with the < > or < > button, press the < > and < >
buttons simultaneously to reset a value to its default.
The value changes to its factory setting. To accept the value, press the <OK> button.
144
5 Control Panel Settings
<Settings>
(menu screen)
Settings
Print Reports
< > < >
Settings
Admin Menu
<OK>/< >Press to display a lower hierarchy
<Back>/< >Press to display a higher hierarchy
Press to close the menu screen
Press to display the menu items in the same hierarchy
<OK>/< >
Admin Menu
Network/Port
<Back>/< >
(option selection screen)
Port Status
Enabled
<OK>
Press to accept
the selection
appears before already
set options.