Printing Reports/Lists; Types Of Reports/Lists - Fuji Xerox DocuPrint 5105 d User Manual

7.2

Printing Reports/Lists

This section describes various reports/lists that can be printed from the printer.

Types of Reports/Lists

The printer can print the following reports/lists in addition to print jobs from its clients.
Note
• When the report name differs from the display name on the control panel, the name on the control panel is listed
in parentheses below.
Report/List Name
(Name on the Control Panel)
Configuration Report
(Configuration)
Job History Report
(Job History)
Error History Report
(Error History)
Meter Report (Print Jobs)
(Meter / Auditron)
Auditron Report (Print Jobs)
(Meter / Auditron)
Font List
(Font List)
PCL Font List
(PCL Font List)
®
PostScript Font List
(PS Font List)
®
PostScript Logical Printers List
*1
(PS Logical)
ESC/P Settings List
*1
(ESCP Settings)
310
7 Maintenance
Required Optional
Accessory
–
Lists the status of various printer settings, including hardware
configuration and network information. Print this list to see if the
options are correctly installed on the printer.
–
You can print this report to check whether print data sent from the
computer has been printed normally. It lists the last 50 print jobs.
You can program your printer to automatically print this report after
every 50 jobs using the control panel. For more details, refer to "[Auto
Job History]" (P. 169).
–
Lists the errors that occurred on the printer.
–
Lists the total number of pages/sheets printed to date by computer
(job owner).
The count starts from the last time data was initialized.
Refer to
• "7.3 Checking the Meter Reading" (P. 314)
–
This report is printed when you select [Meter / Auditron] while the
Auditron Administration feature is enabled.
This report lists the number of pages printed by each user and the
number of sheets printed for each paper type.
Refer to
• For more information about the Auditron Administration feature,
refer to "7.11 Control Access to Printer Features by Pre-registering
Users" (P. 349).
–
Lists fonts that can be used with ESC/P, PDF Bridge, HP-GL/2 and
DocuWorks Bridge.
–
Lists the supported PCL fonts.
You can also check bar-code samples supported by PCL.
–
Lists the supported PostScript fonts.
–
Lists settings of registered PostScript logical printers 1 through 20.
Note
• Logical printers can be created using CentreWare Internet Services.
For more information, refer to the online help for CentreWare
Internet Services.
–
Lists ESC/P print mode settings.
For details, refer to the
(Software/Product Manual) provided with the printer.
Description
'
ESC/P Emulation Setting Guide
'
on the Media