Fuji Xerox DocuPrint 5105 d User Manual page 262

Error Code
016-210 An error occurred in the software.
016-211 Switch off the machine power, make sure that the display is blank, and then switch on the machine
016-212 power. If the error still is not resolved, contact our Customer Support Center.
016-213
016-215
016-217
016-218
016-219
016-229 An error occurred in the software
016-230 Switch off the machine power, make sure that the display is blank, and then switch on the machine
power. If the error still is not resolved, contact our Customer Support Center.
016-233 An error occurred in the software.
Switch off the machine power, make sure that the display is blank, and then switch on the machine
power. If the error still is not resolved, contact our Customer Support Center.
016-234 An error occurred in the Authentication feature of the machine.
016-235 Switch off the machine power, make sure that the display is blank, and then switch on the machine
power. If the error still is not resolved, contact our Customer Support Center.
016-236
016-237
016-238
016-239
016-242 An error occurred in the machine.
Switch off the machine power, make sure that the display is blank, and then switch on the machine
power. If the error still is not resolved, contact our Customer Support Center.
016-400 The user name or password for 802.1x authentication did not match in the setting of Ethernet 1.
Confirm and correctly enter the user name or password in the setting of Ethernet 1. If the error still is
not resolved, check whether the network environment is set correctly.
016-401 The 802.1x authentication method cannot be processed in the setting of Ethernet 1.
Set the authentication method of the machine to the same method as set for the authentication server
in the setting of Ethernet 1.
016-402 The authentication connection of Ethernet1 timed out.
Confirm the network connection of Ethernet1 and switch setting of the authentication device physically
connected to the machine via a network, and check whether it is connected to the machine correctly.
016-403 The root certificate does not match.
Confirm the authentication server and store the root certificate of the server certificate of the
authentication server into the machine.
If you cannot acquire the root certificate of the server certificate, set [IEEE 802.1x] > [802.1x Settings] >
[Verify SrvrCert] to [Disabled] on the display.
016-404 An internal error occurred.
Execute the operation again. If the error still is not resolved, contact our Customer Support Center.
016-405 An error occurred in the certificate stored in the machine.
Initialize the certificate.
For more information on initializing certificates, refer to "[Init/Delete Data]" (P. 208).
016-406 An error occurred in the SSL client certificate.
Take one of the following measures:
• Store an SSL client certificate in the machine to set the SSL client certificate.
• If an SSL client certificate cannot be set on the machine, select an option other than [EAP-TLS] in
016-407 There is a problem with the customized program registered on the machine.
016-408 Modify the customized program and install it again.
016-409
016-410
016-411
016-412
262
6 Troubleshooting
[Authenticate by].
Cause/Remedy