Prioritize Bypass - Fuji Xerox DocuPrint 5105 d User Manual

[PaperTrayPriority]
Printer Settings
PaperTrayPriority
Setting
Tray 1 to Tray 4, Tray
Sets the priority order of the paper trays. This setting will be used by the Auto Tray
5, Tray 6 Selection feature. Defaults are as follows: Tray 1=[1], Tray 2=[2], Tray 3=[3], Tray
4=[4], Tray 6=[5] and Tray 5=[No AutoTraySwitch].
• [1] to [5]
• [No AutoTraySwitch]
Note
• Tray 3, Tray 4, and Tray 6 are optional. The display only shows the trays that are
• You cannot assign the same priority to more than one tray. If the same priority
• Only the lowest priority can be set for Tray 5.
• To use Tray 5 preferentially, refer to " [Prioritize Bypass]" (P. 193).

[Prioritize Bypass]

Printer Settings
Prioritize Bypass
Setting
Prioritize Bypass Allows to give top priority to Tray 5, if the type of paper set in Tray 5 matches with
the paper type specified on your print driver.
• [No] (default)
• [Yes]
Note
• When [Paper Tray Priority] > [Tray 5] is set to [No AutoSwitchOff], the printer
PaperTrayPriority
Tray 1
PaperTrayPriority
Tray 2
PaperTrayPriority
Tray 3
PaperTrayPriority
Tray 4
PaperTrayPriority
Tray 5
PaperTrayPriority
Tray 6
Sets the priority order of the paper trays.
Does not set the priority order of paper types. In this case, the Auto Tray
Selection feature is not used.
actually installed on the printer.
order of other trays are specified, a priority order other than the specified tray is
automatically changed.
feeds the paper from Tray 5 regardless of the paper type mismatching.
Description
Description
5.2 Common Menus Setting
193