Fuji Xerox DocuPrint 5105 d User Manual page 271

Error Code
017-705 ThinPrint .print SSL authentication error.
017-706 Check the server certificate information (expiry date and address) that is registered to ThinPrint .print.
017-707
017-708
017-709 An SSL communication error occurred between ThinPrint .print and the machine.
Check the settings of the machine.
017-713 The SMTP server does not support STARTTLS.
Change SSL/TLS communication setting to other than [STARTTLS].
017-714 SSL connection to the SMTP server failed.
Confirm whether the SMTP server supports SSL connection. If the server supports it, check the port
number of the SMTP server. If the error still is not resolved, contact our Customer Support Center.
017-715 SMTP server's SSL authentication failure. Server certificate data is invalid.
This printer cannot trust the SSL certificate of the SMTP server. Register the SMTP server's root
certificate in this printer.
017-716 SMTP server SSL server authentication error. It is before the valid period of the server certificate.
Use the valid SSL server certificate of the SMTP server. You can avoid this error by setting [SMTP-SSL/
TLS Communication] in [SSL/TLS Settings] to [Disabled], however the validity of the server cannot be
warranted.
017-717 SMTP server SSL server authentication error. The server certificate expired.
Use the valid SSL server certificate of the SMTP server. You can avoid this error by setting [SMTP-SSL/
TLS Communication] in [SSL/TLS Settings] to [Disabled], however the validity of the server cannot be
warranted.
017-718 SMTP server SSL server authentication error. The server name and certificate do not match.
Use the valid SSL server certificate of the SMTP server. You can avoid this error by setting [SMTP-SSL/
TLS Communication] in [SSL/TLS Settings] to [Disabled], however the validity of the server cannot be
warranted.
017-719 SMTP server SSL server authentication error. SSL authentication internal error.
Execute the operation again. If the error still is not resolved, contact our Customer Support Center.
017-723
Character strings the DocuWorks Direct Print feature does not support are used.
Print the file from DocuWorks Viewer via the PCL print driver.
017-725 An error occurred while receiving a print job when the Force Annotation is enabled.
Incorrect name is set for the template of the Force Annotation.
Confirm the name of the template registered in the machine.
017-729 When the machine is used as a print job storage device, print job sending was stopped temporarily
because the number of jobs in the machine exceeded the maximum receivable volume or the space for
spool data was insufficient.
Take one of the following measures:
• Set to spool data to the hard disk from the setting of the storage destination machine.
• Set [IPP] under [Properties] > [General Setup] > [Memory Settings] to [Spool to Hard Disk] by CentreWare
Internet Services.
• Wait for a while and send the job again.
017-730 When the machine is used as a print job storage device, the computer failed to send a job to the
machine because a network error occurred.
Confirm the followings:
• The network cable is connected properly.
• The storage destination machine is powered on.
• The IPP port of the storage destination machine is enabled.
• If the error still is not resolved, contact our Customer Support Center.
017-731 Unable to connect to the POP server.
Confirm the followings:
• The IP address of the POP server is set on the machine.
• The network cable is connected properly.
Cause/Remedy
6.7 Error Messages and Error Codes
271