Fuji Xerox DocuPrint 5105 d User Manual page 270

Error Code
016-761 An error occurred during image processing.
Set [Image Quality] to [Standard] and execute the operation again. If the error still is not resolved, set
[Print Page Mode] to [On].
016-762 The specified printer language is not installed on the machine.
For [Parallel] and [USB] in [Print Mode] under [Network/Port], specify correct printer language.
016-764 Unable to connect to the SMTP server.
Consult the SMTP server administrator.
016-765 Unable to send the e-mail because the hard disk on the SMTP server is full.
Consult the SMTP server administrator.
016-766 An error occurred on the SMTP server.
Consult the SMTP server administrator.
016-767 Unable to send the e-mail because the address is not correct.
Confirm the address, and try sending again.
016-768 Unable to connect to the SMTP server because the machine's mail address is incorrect.
Confirm the machine's mail address.
016-769 The SMTP server does not support delivery receipts (DSN).
Send e-mail without setting delivery receipts (DSN).
016-772 The DNS server address is not set.
Set the DNS server address.
016-781 Probable causes are as follows:
1 The mail server cannot be found during e-mail sending (TCP/IP session establishment failed).
2 The machine received an SMTP server error from the mail server during e-mail sending.
1 Take one of the following measures:
• Check whether the network cables are plugged in securely.
• Check whether the IP address of the SMTP server when an IP address is used for server specification.
2 Enter the host name of the machine using ASCII characters.Available ASCII characters are follows:
- alphabets
- numerals
To check whether or not ASCII characters are used, select [Properties] > [Connectivity] > [Protocols] >
[TCP/IP] in CentreWare Internet Services.
016-792 Failed to acquire the specified job history when printing a Job Report.
The specified job history does not exist.
016-798 Unable to print a document because the hard disk is not installed.
Install the hard disk, and try printing again.Contact our Customer Support Center.
016-799 An invalid print parameter is included in the print data of the application, or the print data and the Print
Setup settings may not match.
Check the print data of the application and the Print Setup settings, and try printing again.
017-700 ThinPrint .print connection timed out.
Confirm the connection to the ThinPrint .print.
017-701 An error occurred while connecting to ThinPrint .print.
Confirm the connection to the ThinPrint .print.
017-702 The data sent to ThinPrint .print is invalid.
Confirm the connection to the ThinPrint .print.
017-703 The print data sent from ThinPrint .print exceeded the maximum size of the machine.
Split the job, and try printing again.
017-704 An internal error occurred.
Switch off the machine power, make sure that the display is blank, and then switch on the machine
power. Send the job again.
270
6 Troubleshooting
Cause/Remedy