Error Messages And Error Codes; Error Messages (In Alphabetical Order) - Fuji Xerox DocuPrint 5105 d User Manual

6.7

Error Messages and Error Codes

Error Messages (in Alphabetical Order)

The following table lists the error messages that appear on the control panel.
Note
• If the message text cannot fit on a single screen, use the <
Message
Add paper to Tray 5
<size and orientation> <type>
Add paper to Tray 6
<size and orientation> <type>
Add paper to Tray N
<size and orientation> <type>
(N: 1 to 4)
Check or adjust
Tray 6 Paper Guides
Check Tray 5 paper
<size and orientation> <type>
Tray 5 (Bypass tray) is out of paper.
Load paper of the size, orientation, and type indicated by the message, into Tray 5.
Refer to
• " Loading Paper in the Bypass Tray" (P. 127)
Tray 6 (HCF B1) is out of paper.
Load paper of the size, orientation, and type indicated by the message, into Tray 6.
Refer to
• " Paper Jams in Tray 6 (HCF B1) (Optional)" (P. 225)
Paper Tray N is out of paper.
Load paper of the size, orientation, and type indicated by the message, into paper tray N.
If the message persists after the correct paper is loaded, the machine may not recognize
the paper size correctly. Make sure the position of the paper guides.
Note
• Pressing the <Information> button will display detailed information on the control
panel.
Refer to
• " Loading paper into Trays 1 through 4" (P. 128)
The correct type of paper is not loaded in Tray 6 (HCF B1).
Load paper of the size, orientation, and type indicated by the message, into Tray 6.
If the message persists after the correct paper is loaded, the machine may not recognize
the paper size correctly. Make sure the position of the paper guides.
Refer to
• " Loading Paper into Tray 6 (HCF)" (P. 131)
The correct type of paper is not loaded in Tray 5 (Bypass tray).
Load paper of the size, orientation, and type indicated by the message, into Tray 5.
Note
• Pressing the <Information> button will display detailed information on the control
panel.
Refer to
• " Loading Paper in the Bypass Tray" (P. 127)
> and < > buttons to change screens.
Symptom/Cause/Remedy
6.7 Error Messages and Error Codes
251