Exit Roller / Roll; Turnover Roller; Sensor Section - Konica Minolta bizhub C250 Service Manual

Field Service Ver. 1.0 Jul. 2005
3.1.6

Exit Roller / Roll

[2]
3.1.7

Turnover Roller

[2]
3.1.8

Sensor Section

[2]
[3]
[1]
4582fs2515c0
[1]
4582fs2516c0
[3]
4582fs2517c0
[1]
4582fs2522c0
3. Periodical check
A. Cleaning procedure
1. Open the Paper Exit Section Cover
[1].
2. Wet a cloth with alcohol, and use it to
wipe up the Exit Roller [2]/Roll [3].
A. Cleaning procedure
1. Open the Paper Exit Section Cover
[1], and open the Turnover Guide
Plate [2].
2. Wet a cloth with alcohol, and use it to
wipe up the Turnover Roller [3].
A. Cleaning procedure
1. Remove the Registration/Timing
Sensor mounting plate.
See P.8
2. Clean the Registration [1]/Timing
Sensor [2] with a blower brush or the
like.
9