Konica Minolta bizhub C250 Service Manual page 863

6. Finisher operations
52
7. Set the correction value using the
[+]/[-] keys.
• To make width A wider, enter a posi-
tive value.
• To make width A narrower, enter a
negative value.
• Adjustment range: +10 max. and -10
min. (1 increment: 0.5 mm)
8. Touch [END].
9. Touch [Exit] on the Service Mode
screen.
10. Turn OFF the main power switch,
9J08F3E512DA
wait for 10 sec., then turn the switch
ON.
11. Make a copy and check the punch
hole positions again.
Field Service Ver. 1.0 Aug. 2006