Internet Isw Set; Http Setting - Konica Minolta bizhub C250 Service Manual

10. Service Mode
10.17 Internet ISW
1
• By using this setting, the Firmware stored in the Server can be downloaded over internet
for upgrading.
• For details for upgrading the Firmware, refer to "Firmware upgrade" in the Maintenance
section.
See P.43
10.17.1

Internet ISW Set

Functions • To set whether or not to enable each setting for Internet ISW.
Use • To use when upgrading the Firmware by Internet ISW.
• Each setting such as Server setting will be valid by setting this to "ON".
NOTE
• When the following setting is set to "ON", this setting will automatically be set
to "OFF" and cannot be changed.
[Administrator Setting] → [Security Setting] → [Enhanced Security Mode]
Setting/ • The default setting is OFF.
Procedure
10.17.2

HTTP Setting

• It will be displayed only when [Internet ISW Set] is set to "ON".
A. Data Input Setting
Functions • To set whether or not to enable downloading using the HTTP Protocol.
Use • To use when accessing the Server using the HTTP Protocol.
• Setting on the Proxy Server will be valid when this setting is "ON".
Setting/ • The default setting is OFF.
Procedure
B. Connect Proxy
Functions • To set whether or not to connect via Proxy Server when accessing the Server.
Use • To use when accessing the Server via Proxy Server.
Setting/ • The default setting is OFF.
Procedure
C. Proxy Server
Functions • To set the Address and the Port Number for the Proxy Server.
Use • To use when accessing the Server via Proxy Server.
Setting/ <Server Address>
Procedure • Enter the IP Address using the Version 4 method or FQDN method.
<Port Number>
• Enter the value between 1 and 65535 using the 10-key pad.
370
ON
ON
ON
Field Service Ver. 3.0 Aug. 2006
"OFF"
"OFF"
"OFF"