Manual Adjust: Sub Scanning Direction 1-Sided / 2-Sided Document Stop Position Adjustment - Konica Minolta bizhub C250 Service Manual

8. Mechanical adjustment
8.4.4 Manual adjust: Sub Scanning Direction 1-Sided / 2-Sided document stop
position adjustment
Adjusted range: -7 mm to + 7 mm
A. Adjustment procedure
1. Set the mode to the Service Mode.
2. Touch [ADF].
3. Touch [Original Stop Position].
4. Select [Sub Scanning Direction 1-Side] or [Sub Scanning Direction 2-Side].
5. Enter the value from the ten-key pad. (Press the ID key to change the +/- code.)
E F
24
• To shift the position in the direction of
F, set the code to +.
• To shift the position in the direction of
E, set the code to -.
6. Touch [END].
4582fs3517c0
Field Service Ver. 1.0 Jul. 2005
4582F3E524DA