Field Service Ver. 3.0 Aug. 2006
(3) Original Direction
Functions
• To set the default setting for the direction of the original during PC printing.
Use
Setting/
• The default setting is Portrait.
Procedure
(4) Spool Print Jobs in HDD before RIP
Functions
• To set whether to store the print data to HDD when receiving the next job during Rip
process of the current job.
Use
Setting/
• The default setting is ON
Procedure
(5) A4/A3 ↔ LTR/LGR Auto Switch
Functions
• To set whether to switch between A4 and Letter size paper, and A3 and Ledger size
paper in reading.
Use
• To output Letter size document to A4 size, and Ledger size document to A3 size.
• To output A4 size document to Letter size, and A3 size document to Ledger size.
NOTE
• When switching the size, the image will be printed in the same magnification.
• The image will not be reduced when there is image deficiency.
Setting/
• The default setting is OFF.
Procedure
(6) Banner Setting
1
Functions
• To set whether or not to print on the Banner (front cover) page.
Use
• To use when the Banner (front cover) page is to be printed.
Setting/
• The default setting is OFF.
Procedure
B. Paper Setting
(1) Paper Tray
Functions
• To set the Paper Feed Tray when not specified by the printer driver during PC print-
ing.
Use
• To use when Paper Feed Tray cannot be specified by the printer driver when printing
from Windows DOS, etc.
Setting/
• The default setting is Auto.
Procedure
(2) Default Paper Size
Functions
• To set the paper size when not specified by the printer diver during printing.
Use
• To use when the paper size cannot be specified by the printer driver during printing
from Windows DOS, etc.
"Portrait"
"ON"
ON
ON
8. Utility Mode
Landscape
"OFF"
"OFF"
"OFF"
197