Konica Minolta bizhub C250 Service Manual page 249

8. Utility Mode
F. Restrict User Access
• It will not be displayed when the following setting shows that Vendor 1 is mounted.
1
[Service Mode] → [Billing Setting] → [Management Function Choice]
(1) Restrict Access to Saved Program Jobs
Functions • To set the prohibition for modifying the registered Copy program.
Use • To be used when prohibiting the user from changing the Copy program.
Setting/ 1. Touch the key for the appropriate Copy program.
Procedure 2. Touch [OK].
(2) Delete Saved Program Jobs
Functions • To delete the registered Program Job.
Use • To delete the registered Program Job.
Setting/ 1. Touch the appropriate Program Job.
Procedure 2. Touch [Delete].
3. Touch [Yes] on the Check screen to delete the Program Job.
(3) Restrict Access to Job Settings
<Changing Job Priority>
Functions • To set whether to allow or restrict the change on the print priority for the Job.
Use • To Restrict the change on the print priority for the Job.
Setting/ • The default setting is Allow.
Procedure
<Deleting Other User's Jobs>
Functions • To set whether to allow or restrict Job delete by other users when the user is authen-
ticated.
Use • To allow other users to delete the Job when the user is authenticated.
Setting/ • The default setting is Restrict.
Procedure
<Registering and Changing Addresses>
Functions • To set whether to allow or restrict the change of the registered address.
Use • To prohibit the change on the registered address.
Setting/ • The default setting is Allow.
Procedure
NOTE
• [Allow] cannot be selected when the following setting is set to "ON".
[Administrator Setting] → [Security Setting] → [Enhanced Security Mode]
206
"Allow"
Allow
"Allow"
Field Service Ver. 3.0 Aug. 2006
Restrict
"Restrict"
Restrict