Konica Minolta bizhub C250 Service Manual page 177

6. Other
(2) Reinstallation Procedure
[1]
[4]
134
<Front>
1. Position the round bead [1] of the
Scanner Drive Cable in the pulley [2]
[2]
as shown.
NOTE
• Make sure that the bead snugly
rests in the slit in the pulley.
4036fs2554c0
2. Wind the fixed bead end of the cable
around the pulley five turns clock-
wise, from the rear toward the front
side.
NOTE
• Make sure that no part of the cable
rides on the other.
4036fs2555c0
3. Wind the hook end of the cable
around the pulley five turns counter-
clockwise, from the front toward the
rear side.
NOTE
• Make sure that no part of the cable
rides on the other.
4036fs2556c0
4. Slip the Cable Holding Jig [3] onto
the pulley to secure the cable in posi-
[3]
tion.
4036fs2557c0
<Rear>
5. Position the round bead [4] of the
Scanner Drive Cable in the pulley [5]
as shown.
[5]
NOTE
• Make sure that the bead snugly
rests in the slit in the pulley.
4036fs2558c0
Field Service Ver. 3.0 Aug. 2006