Konica Minolta bizhub C250 Service Manual page 296

Field Service Ver. 3.0 Aug. 2006
(2) E-Mail RX (POP)
<E-Mail RX Setting>
Functions • To set whether to enable or disable the e-mail reception setting.
Use • To disable the e-mail reception setting.
Setting/ • The default setting is ON.
Procedure
<POP Server Address>
Functions • To set the POP Server Address.
Use • To enter the POP Server Address.
Setting/ • SMTP Server Address Version 4 format
Procedure [0 to 255] . [0 to 255] . [0 to 255] . [0 to 255]
1. Touch [Host Address].
2. Select [IP Address Input], and enter the IP address.
3. Select [Host Name Input] to enter the host name, and touch [OK].
4. Enter the Login Name (Up to 63 characters).
5. Enter the password (Up to 15 characters).
<SSL Setting>
1
Functions • To set whether or not to use SSL when receiving an E-Mail.
Use • To use when receiving an E-Mail which used SSL.
Setting/ • The default setting is OFF.
Procedure
<Port Number (SSL)>
1
Functions • To set the Port Number when using SSL.
Use • To enter the Port Number when using SSL.
Setting/ 1. Touch [Input].
Procedure 2. Touch the Clear key.
3. Enter the Port Number (SSL) between 1 and 65535 using the 10-key pad.
<Detail Setting: APOP Authentication>
Functions • To set whether to use APOP Authentication
Use • To use APOP Authentication
Setting/ • The default setting is OFF.
Procedure
<Detail Setting: Port No.>
Functions • To set the Port No. for transmitting with POP server.
Use • To enter the Port No. for transmitting with POP server.
Setting/ 1. Press the Clear key.
Procedure 2. Enter the Port No. between 1 and 65535 using the 10-Key Pad.
"ON"
ON
ON
8. Utility Mode
OFF
"OFF"
"OFF"
253