2. Periodical check
2.1.2
Replacing the Paper Take-up Roller
[2]
[4]
[6]
[6]
4
[1]
4348F2C501DA
[3]
[2]
[2]
4348fs2502c0
[5]
[4]
4348fs2503c0
[7]
4348fs2504c0
Field Service Ver. 1.0 Jul. 2005
1. Remove the Rear Cover and the
Rear Right Cover.
See P.10
2. Remove the Tray3.
3. Remove the Paper Separation Roller
Mounting Bracket Assy.
See the procedures 1 to 2 in page 3
"Separation Roller Assy."
4. Disconnect the connector [1] from
the Main Control Board.
5. Remove four screws [2] and remove
the Paper Take-up Unit [3].
6. Remove two screws [4] and remove
the Mounting Frame [5] for the Paper
Separation Roller Mounting Bracket
Assy.
7. Remove two screws [6] and remove
the Paper Take-up Cover [7].