Konica Minolta bizhub C250 Service Manual page 281

8. Utility Mode
(11) DNS Search Domain Name1 to 3
1
Functions • To set the DNS Search Domain Name.
Use • To enter the DNS Search Domain Name.
Setting/ 1. Touch [DNS Search Domain Name 1 to 3].
Procedure 2. Enter the DNS Domain Name on the on-screen keyboard, and touch [OK].
(12) Dynamic DNS Setting
1
Functions • To set whether or not to enable the Dynamic DNS setting
Use • To set the Dynamic DNS.
Setting/ • The default setting is Disable.
Procedure
(13) Host Name
Functions • To set the DNS Host name.
Use • To enter the DNS Host name.
Setting/ 1. Touch [DNS Host Name].
Procedure 2. Enter the DNS Host name on the screen key board, and touch [OK].
(14) IP Filtering
Functions • To set the IP Filtering.
Use • To set whether to receive IP address within the specified range of the value.
Setting/ <Permit Access>
Procedure 1. Select Enable or "Disable" on [Permit Access].
2. Select range Set 1 to Set 5, and input address using the 10-Key Pad.
3. Touch [OK].
<Deny Access>
1. Touch [Deny Access].
2. Select Enable or "Disable" on [Deny Access].
3. Select range Set 1 to Set 5, and enter address using the 10-Key Pad.
4. Touch [OK].
(15) RAW Port No.
Functions • To set the RAW port No.
Use • To set the RAW port number for the printer.
1
• Several data can be accepted at the same time by selecting several ports.
Setting/ 1. Select the necessary port number.
Procedure 2. Select to use or not to use.
3. When using the selected port, press the Clear key to clear the value, and enter the
RAW port number using the 10-Key Pad.
4. Touch [OK].
238
Enable
Field Service Ver. 3.0 Aug. 2006
"Disable"