Roller Exit - Konica Minolta BIZHUB 25E Field Engineering Manual

ROLLER EXIT

1. Remove the Exit assy. (See "EXIT ASSY" on page 5-60.)
2. Remove the Guide lower exit. (See "SENSOR PDS/SWBS" on page 5-61.)
3. Disconnect the connector [1] and remove the harness from the hook.
4. Release two hooks [2], then remove the Bracket gear [3].
[ 1 ]
[ 2 ]
[ 3 ]
[ 2 ]
5. Remove the Gear 20 0.8 [4] on the back side.
[ 4 ]
6. Remove one screw [5] then remove the Bracket shaft guide [6].
[ 6 ]
[ 5 ]
5-63