10. Service Mode
10.8.4
No Sleep
Functions
• To display the option of "OFF" for the Sleep Mode Setting screen available from
Administrator Setting.
Use
• To display the option of "OFF" for the Sleep Mode Setting.
NOTE
• The sleep mode will begin in 48 hours even if it sets it to "OFF."
Setting/
• The default setting is "Prohibit."
Procedure
10.8.5
Original Size Detection
Functions
• To change the document size detection table.
Use
• Use to change the setting for the document size detection table.
Copy Glass : To change the size detection table for the document glass.
ADF
Setting/
<Copy Glass>
Procedure
• The default setting is "Table1."
NOTE
• Table 2 can be set only when Original Size Detecting Sensor/2 is being
mounted.
<ADF>
• The default setting is "Disable."
10.8.6
Foolscap Size Setting
Functions
• To set the size for Foolscap paper.
Use
• Upon setup.
• To change the size for Foolscap paper.
Setting/
• Select the size from among the following five.
Procedure
220 x 330 mm
336
Permit
: To set whether or not to detect 18k/16k while using ADF (only when
marketing area is Europe)
"Table1"
Enable
8
/
x 13
8
/
x 13
1
1
2
4
Field Service Ver. 3.0 Aug. 2006
"Prohibit"
Table2
"Disable"
8
/
x 13
/
8 x 13
1
1
8
4