Konica Minolta bizhub C250 Service Manual page 235

8. Utility Mode
E. Fax Active Screen
• It will be displayed only when the optional FAX kit (FK-502) is mounted.
• It will not be displayed when the following setting shows that Key Counter, Vendor, or
Authentication Device is mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
(1) TX Display
Functions • To set the screen display for the control panel when transmitting Fax.
Use • To display [Sending] on the screen when transmitting Fax.
Setting/ • The default setting is OFF.
Procedure
(2) RX Display
Functions • To set the screen display on the control panel when receiving Fax.
Use • To display [Receiving] on the screen when receiving the Fax.
Setting/ • The default setting is OFF.
Procedure
F. Copy Initial Screen Setting
2
Functions • To select the initial screen when selecting the copy function.
Use • To switch the initial screen to the quick screen (All basic copy settings can be done at
the same time on the single screen) when selecting the copy function.
Type 1: Normal initial screen
Type 2: Quick screen
Setting/ • The default setting is TYPE1.
Procedure
G. Job List Default
2
Functions • To set the displayed screen in default when pressing [Job List].
Use • To change the displayed screen in default when pressing [Job List].
Current print jobs : [Current Jobs] screen is displayed.
Print Job History : [Job History] screen is displayed.
Setting/ • The default setting is Current Print Jobs.
Procedure
192
ON
ON
"TYPE1"
"Current Print Jobs"
Field Service Ver. 3.0 Aug. 2006
"OFF"
"OFF"
TYPE2
Print Job History