Adjustment Of Height And Inclination - Konica Minolta bizhub C250 Service Manual

5. Mechanical adjustment
5.3

Adjustment of height and inclination

[2]
[3]
[3]
30
4583fs3503c0
A
B
4583fs3504c0
[1]
4583fs3505c0
[3]
[3]
4583fs3506c0
Field Service Ver. 1.0 Jul. 2005
1. Gently move the finisher toward the
machine and check for following.
• Is the positioning pin aligned with the
hole in the finisher?
• Does the horizontal transport unit run
excessively slantwise?
• Does the clearance at A equal that at
B?
• If the finisher is not at the same height
as the machine, adjust the machine as
follows.
2. Remove the Finisher [1] from the
main unit, and remove two caster
covers [2].
3. Remove four adjusting screw covers
[3].