Konica Minolta bizhub C250 Service Manual page 613

3. Firmware upgrade
3. Mount the Compact flash on the PC, and check the Drive name, which was recognized
in the Windows. (F-drive in the following figure)
4. Click [Start] → [Program] → [Accessories] → [Command Prompt] to open the Com-
mand Prompt.
5. Use the Command prompt to move into the uncompressed directory.
6. Specify the Drive of Compact flash, which was recognized through the procedure 3,
and execute the "mksf.bat." (Input the C: \bizhub\card_work>mkcf f (Drive number): in
the below figure, and push the "Enter".)
10
Field Service Ver. 3.0 Aug. 2006
4038F2E564DB
4036fs2623e0