CHAPTER 4: Novell NetWare Configuration and NIMANAGE Utility
6. Now that you have added statements to the AUTOEXEC.NCF file, you
must power down the server and restart it for the changes to take effect.
If you don't want to make permanent changes to your AUTOEXEC.NCF
file, you can type the SET command at the Server console to make
changes. Any changes will be in effect until the server is powered down
and restarted again.
4.4.2 C
ONFIGURING IN
One enhancement over earlier NetWare versions is the use of function keys,
displayed at the bottom of the screen. You will use these keys to configure the
Print Server on PCONSOLE.
Once you are sure you have installed the Bindery Context, you can
configure the Print Server on NetWare 4.0 by performing these steps:
1. Start PCONSOLE.
2. Select Bindery Mode.
3. Select the Quick Setup option.
4. Enter Print Server, Printer, and Queue names.
5. Enter printer TYPE name.
6. Add to Print Server and Queue lists.
If you encounter any errors during installation, try logging out and logging
in again.
S
1: S
PCONSOLE
TEP
TART
Before you begin, log into the network as ADMIN. After you log in, type
PCONSOLE and press <Enter>. The screen below appears.
B
M
INDERY
ODE WITH
PCONSOLE
43