Black Box LE3840A Manual page 20

Wrong BNC Connections to the Ethernet Print Server
Fig. 3-6 shows two incorrect ways to make the BNC connection. You
must always make your BNC connection using a T-connector (which is
not provided with your Ethernet Print Server) directly connected to the
port marked ThinNet.
Ethernet Print Server
Ethernet Print Server
Fig. 3-7. Wrong Connections.
CHAPTER 3: Installation
This connection is wrong because
the T-connector is not directly
connected to the Ethernet Print
Server. The cable between the
T-connector and the Ethernet
Print Server BNC connector forms
another branch on the network
—which is not allowed with the
Ethernet Print Server.
This connection is wrong because
a T-connector is not used.
19