CHAPTER 4: Novell NetWare Configuration and NIMANAGE Utility
4.3 Configuration—Using NetWare 2.15, 3.10 and Later
Follow these steps to configure the Print Server with PCONSOLE.
1. Log into the network as Supervisor and start PCONSOLE.
2. Create a new print server and enter the Print Server name.
3. Configure the Print Server.
4. Assign print queues to the printer.
5. Set up NOTIFY options for the printer (optional).
6. Ethernet Print Server High Speed users only: If you are using NetWare
3.10 or later, set unencrypted passwords to ON.
4.3.1 E
NCRYPTED
The Print Server 4-Port supports encrypted passwords. The Print Server High
Speed does not support encrypted passwords.
4.3.2 PCONSOLE V
Make sure you have a version of PCONSOLE other than version 1.0. You
cannot configure the Print Server with version 1.0. If you have this version,
contact Novell for a PCONSOLE upgrade.
S
1: S
PCONSOLE
TEP
TART
Make sure you have supervisor rights before you begin, or you will not be able
to configure the Print Server devices. After you log into the network, type
PCONSOLE and press <Enter>.
Choose "Print Server Information" from the Available Options menu. See
Fig. 4-5.
P
ASSWORDS
ERSION
31