PURE NETWORKING 10/100 MINI PRINT SERVERS USERS' MANUAL
Make sure to reset the print server (described in Section 9.2.11) in order for the
changes to take effect.
9.2.7 S
IP A
ETTING THE
DDRESS
The IP Configuration page (see Figure 9-9) allows you to configure the IP address
where the print server is to be located.
Print Server info
Save to Print Server
Figure 9-9. Set the IP address.
The print server will obtain its IP address automatically by the protocol DHCP,
BOOTP, or RARP if you configure the IP address as Auto. Click on the Save to
Print Server button to save the print server's configuration.
The print server will verify your password (it will ignore the User Name item) when
you save the configuration. Make sure to reset the print server (described in
Section 9.2.11) in order for the changes to take effect.
9.2.8 C
DHCP P
ONFIGURING
ARAMETERS
The print server can be configured as a DHCP server (see Figure 9-10) to assign IP
addresses to other devices on the network.
106