Using The Appletalk Adminstration Program - Black Box LE3840A Manual

CHAPTER 5: AppleTalk Configuration and Administration Program
5.4 Using the AppleTalk Administration Program
W U
HEN TO SE AND
The Administration program is used for three purposes:
• To configure the Ethernet Print Server when you do not have a PostScript
printer attached to parallel port #1, or when you have PostScript printers
attached to more than one parallel port and/or the Uniport.
• To change the network zone and/or change printer names for the
Ethernet Print Server printer.
• To help technical support diagnose problems. Functions included are:
view the configuration, error log, and printer setup.
To access the Administration program, do the following:
1. Copy the files from the program's diskette (supplied with the Ethernet
Print Server) to a folder. For example, place the program in a folder
called Utility.
2. Double-click on the Administration program icon when it appears on the
desktop. The Zone and Ethernet Print Server Device Dialog menu
appears as shown below.
Zone:
EtherTalk Users
Ethernet
Fig. 5-3. Choose the Zone and the Ethernet Print Server/MIO Device.
H I
OW TO NITIATE
Ethernet Print Server Device:
Ethernet Print Server
Cancel Select
73