Black Box LE3840A Manual page 96

The output filter psbanner prints PostScript banners.
If you wish to use these filters, you must change infilter and outfilter entries
in the /etc/printcap file. A sample printcap entry that uses these filters is
shown below:
<printer_name>|Ethernet Print Server printer:\
:lp=/dev/dpi/<printer_name>:\
:if=/usr/dpi/psfilter:\
:of=/usr/dpi/psbanner:\
:sd=/usr/spool/<printer_name>:
Continue the installation begun in Section 6.4 by following the steps below:
6. What is the node name of the Ethernet Print Server unit? Type the node
name and press return.
7. What is the printer name for this Ethernet Print Server-linked printer?
Type a printer name and press return.
8. What type of Ethernet Print Server are you installing? Select one from
the following choices:
1) Ethernet Print Server High Speed
2) Ethernet Print Server 4-Port
Type 1 or 2 and press <Return>.
9. Which port do you want your printer attached to? The screen displays a
list of ports available on this Ethernet Print Server. Select one and press
<Return>.
For example, type 1 and press <Return>.
10. Your screen will now display the information you provided the install
script. For example:
Type of Ethernet Print Server: Ethernet Print Server 4-Port
Node name of the Ethernet Print Server: DPIfast
Printer name to be used by this printer: <printer_name>
The printer is attached on: port 1
You are asked to accept this configuration. Type "yes" or "no" and press
<Return>.
11. Is this printer PostScript? Type yes or no. Press <Return>.
CHAPTER 6: UNIX Printing through TCP/IP
95