Black Box LE3840A Manual page 89

ETHERNET PRINT SERVERS HIGH SPEED AND 4-PORT
Table 6-1. Configuring Your Ethernet Print Server.
Requested Information Example
Name of queue to add
Destination Host
Short Form Filter
Long Form Filter
Name of remote
printer queue
Name of device to add print1
7. After you have supplied all values, press <Enter>. You are now prepared
to print.
Setting Up an HP/UX Remote Printer to Use lpd
Set up a remote printer on the host that sends jobs to the Ethernet Print
Server using lpd. To do this:
1. At the prompt, type: #sam <cr>
2. When a window appears, select "Printer/Plotter Manager."
3. When the menu appears, select "List printer and plotters."
4. When a list appears, select Actions in the title bar.
5. From the pull-down menu, select "Add Remote Printer."
6. When a window appears, add values to configure the "Ethernet Print
Server."
7. At the bottom of the screen, select "Remote Printer is on BSD system"
from the three choices available.
Requested Information Example
Printer name
Remote System Name <IP hostname>
Remote Printer Name
88
print 1
PrintFast
/usr/lpd/bsdshort
/usr/lpd/bsdlong
PORT1-PORT4 or
IQPORT
Table 6-2.
<print queue name>
<PORT1-PORT4 or
IQPORT>
Description of Inputted Data
Name of local printer queue
IP hostname
Required value
Required value
Port on Ethernet Print Server
Name of local queue
Description of Inputted Data
add print queue name here
add hostname
add lpd queue name