Black Box LE3840A Manual page 109

ETHERNET PRINT SERVERS HIGH SPEED AND 4-PORT
When the green LED...
Normal Operating Conditions
is ON solid
blinks 3 times and
stays ON solid
is ON solid after
completing the
self-tests
is ON solid
Error Conditions
blinks rapidly
blinks rapidly 4 times
and then pauses
blinks short and then
long continuously
blinks slowly
blinks rapidly
108
Table 7-1. Status Light Conditions.
And the Print Server is...
first powered on
finished with the self-tests
searching for a file server
to log into (for about five
seconds)
awaiting print jobs
performing self-tests
performing self-tests
performing self-tests
awaiting print jobs
awaiting print jobs
Then the Print Server...
is performing self-tests.
prints out the status pages.
is ready to receive print jobs.
is functioning properly.
detects a bad RAM. Call
for technical support.
failed the Ethernet hardware
self-test. Check the network.
did not pass the ROM
checksum test. Call for
technical support.
detects that one or more
printers need attention.
This means a printer could
be off-line or a form change
is needed.
detects a serious error that
prevents proper functioning.