Black Box LE3840A Manual page 48

Ethernet print server high speed ethernet print server 4-port
Table of Contents

Advertisement

CHAPTER 4: Novell NetWare Configuration and NIMANAGE Utility
S
5: E
P
TEP
NTER
RINTER
Tab down to the Printer Type field and press <Enter>. When the pop-up
window appears, select the Other/Unknown option. Press <Enter> to select
your choice. With all your choices now selected, press the <F10> key (Save
Changes) to save your configuration.
Follow steps 1 through 5 to configure all servers connected to your Print
Server units on the network.
S
6: A
P
TEP
DD TO
If you need to view, add, delete, or modify print servers or print queues after
your initial setup, select either the Print Queues or Print Servers options from
the Available Options screen.
Selecting either Print Queues or Print Servers will call up information
screens from which you can view or modify more choices.
• On the Print Queues Information screen, you can select Print Jobs, Status,
Attached Print Servers, Information, Users, Operators, and Print Servers.
• On the Print Server Information screen, you can select Printers,
Information and Status, Users, Operators, Description, Password, and
Audit.
S
7: P
TEP
LUG IN THE
Once you have finished configuring the Ethernet Print Server with
PCONSOLE, you can plug the power supply into the Ethernet Print Server
and into a wall outlet.
The front-panel green LED should do the following:
• Go on when the unit first powers up. The Ethernet Print Server does a
series of self-tests. If a problem is found, the light blinks in a particular
pattern to identify the problem. See Chapter 7, Troubleshooting for
details.
• When the Ethernet Print Server passes the self-tests, the light blinks three
times and stays on solid. The Ethernet Print Server then sends a status
page to the printer attached to parallel port #1.
• The network software initializes. This takes about 15 seconds. You are
now ready to print.
If the green LED does not go on at any time, try plugging the power cord
into another wall outlet. If it still does no power on, call for technical
support.
T
N
YPE
AME
S
RINT
ERVER AND
P
S
OWER
UPPLY
Q
L
UEUE
ISTS
47

Advertisement

Table of Contents
loading

Table of Contents