Black Box LE3840A Manual page 103

ETHERNET PRINT SERVERS HIGH SPEED AND 4-PORT
7. What is the node name of the Ethernet Print Server unit? For example,
type the following and press return:
DPIfast
8. What is the printer name for this Ethernet Print Server-linked printer?
Type a printer name and press return.
9. What type of Ethernet Print Server are you installing? Select one from
the following choices:
1) Ethernet Print Server High-Speed
2) Ethernet Print Server 4-Port
10. Which port do you want your printer attached to? The screen displays a
list of ports available on this Ethernet Print Server. Select one and press
<Return>.
For example, type 1 and press <Return>.
11. Your screen will now display the information you provided the install
script. For example:
Type of the Print Server: Ethernet Print Server
Node name of the Print Server: DPIfast
Printer name to be used by this printer: <printer_name>
The printer is attached on: port 1
Do you want to accept this configuration? Type "yes" or "no" and press
return.
12. Is the printer PostScript? Type "yes" or "no." Press return.
13. The script starts the daemon for the newly configured printer
automatically. It also displays the path used in case you ever need to
restart the daemon. In the following example, the path would be:
/usr/dpi/dpi_print /dev/dpi/printer_name DPIfast 10001 &
The example reflects names supplied to the script earlier.
When the installation script is complete, you must still configure the printer
and make it known to the lp system.
The SCO UNIX lp system uses the lpadmin maintenance command to
configure a printer (there is no /etc/printcap file). The specific commands
to do this are:
lpadmin -p printer_name
102