Black Box LE3840A Manual page 76

CHAPTER 5: AppleTalk Configuration and Administration Program
How to Configure Ethernet Print Server
Use Printer Setup to configure your Ethernet Print Server for PostScript
printers.
Each menu item is explained on the pages that follow. Reset and Serial
Port options are unavailable.
Reset
Reset cannot be used by the Ethernet Print Server unit. If you want to reset
the Ethernet Print Server, do so through the front panel of your printer or
simply by turning the printer off and on. This item is grayed out on the
Ethernet Print Server menu.
Configuration
Configuration allows you to change the Ethernet Print Server device name,
the AppleTalk Zone name, and view the configuration features of the
Ethernet Print Server board. The Ethernet Print Server creates a default
name you can change so it is more significant for you. For example, NP
ACCOUNTING, etc. Be sure to power the printer off and on to accept
changes made. Changes will not occur if the Ethernet Print Server is not
recycled. When you choose this item on the Ethernet Print Server menu, the
screen in Fig. 5-5 appears.
75