Print Queue Functions - Black Box LE3840A Manual

ETHERNET PRINT SERVERS HIGH SPEED AND 4-PORT
4.10.4 P Q
RINT UEUE
How to Select Print Queues
When you send a print job, each job is sent to a print queue. The print queue
then sends the job to a specified printer. If a print server is servicing queues
on multiple file servers, you must assign queues to printers on each file server.
Follow the steps below to assign queues to Print Server printers.
1. Start the PCONSOLE utility. Select "Print Server Information" from the
Available Options menu.
2. Select the Print Server from the Print Servers list.
3. Select "Print Server Configuration" from the Print Server Information
menu.
4. Select "Queues Serviced by Printer" from the Print Server Configuration
menu.
5. Select a printer from the Defined Printers list.
6. Press <Ins> at the File Server/Queue/Priority screen. The Available
Queues list appears.
7. Select a queue from the Available Queues list.
8. Press <Enter> at the Priority screen to leave the priority setting at 1.
Repeat steps 6 and 7 to assign additional queues to the printer.
Press <Enter> at the File Server/Queue/Priority screen to display the
Priority setting screen. To change the priority settings, press the
<BACKSPACE> key to delete the current setting. Type a new number
from 1 to 10 and press <Enter>. 1 is the first queue serviced by the print
server, and 10 is the last.
9. Press <Esc> and save all changes.
How to Remove Queues
To remove queues assigned to the Print Server, you need to do the following:
1. Start the PCONSOLE utility. Select "Print Server Information" from the
Available Options menu.
2. Select the Print Server from the Print Servers list.
3. Select "Print Server Configuration" from the Print Server Information
menu.
66
F
UNCTIONS
NOTE