Black Box LE3840A Manual page 19

ETHERNET PRINT SERVERS HIGH SPEED AND 4-PORT
• Using a ThinNet Ethernet interface. The ThinNet Ethernet wires use
a BNC T-connector (not included) to plug into the BNC port on the
Ethernet Print Server (marked ThinNet on the back panel). Thin
Ethernet cable is a quarter-inch coaxial cable (usually RG-58/U) that
uses the cylindrical BNC T-connector to attach to the BNC port.
Ethernet Print Server Unit
18
Fig. 3-6. ThinNet Interface.
Connect a BNC T-connector
directly to the Ethernet Print
Server BNC port as shown in
the picture to the left. Any
other type of connection will
not work with the Ethernet
Print Server.